OK, this guy has all sorts of wiring mods...
http://www.geocities.jp/dgb_studio/index_e.htm
Go to the right side of the page and click Wiring For Guitar
Next, click 1S Mod(27)
now scroll down to 1S18 normal Tone
This is a basic schematic... Personally, I use 500K pots instead of 250K, for a brighter tone, my feeling being that if I want it less bright, that is what the tone knob is for...
Also, open up your guitar and make a note of the exact wiring you see, and you could probably just duplicate it, although I prefer knowing what's really going on...
Here is what's really going on...
The pickup has a hot and a ground leg... Simple...
A volume control is just a fixed resistance across hot and ground, with the center tap (what moves internally) variable from one side to the other...
So, with a 500K pot, with the volume all the way up, the tap is over at the pickup side, so the output is still 500K above ground...
With the volume all the way down, there is no resistance between the output and ground...
A tone control simply is a variable resistance between the hot and a capacitor that ties to ground...
With the tone all the way up on a 500K pot, there is 500K of resistance between the hot and the capacitor...
With the tone all the way down, there is no resistance between hot and the capacitor...