Schematics Help?...

Coda

Not John Watt
...so here I am on Winter Break, and Ive decided to fix all the guitars I have that need some repairs. Today, I rewire my 1959 Gibson ES-330T. However, I have NO IDEA of the schematics of the thing. I cant find anything on the interwebs that is a schematic of the 330T...its a single pickup, p-90, with a volume, and tone pot. Any of you electronic Whizes have any idea on the schematics for this?...
 
...so here I am on Winter Break, and Ive decided to fix all the guitars I have that need some repairs. Today, I rewire my 1959 Gibson ES-330T. However, I have NO IDEA of the schematics of the thing. I cant find anything on the interwebs that is a schematic of the 330T...its a single pickup, p-90, with a volume, and tone pot. Any of you electronic Whizes have any idea on the schematics for this?...

Sure... That is a super simple circuit... I can draw one up, but I think I have a resource for you that will have it... Hold on...
 
OK, this guy has all sorts of wiring mods...

http://www.geocities.jp/dgb_studio/index_e.htm

Go to the right side of the page and click Wiring For Guitar
Next, click 1S Mod(27)
now scroll down to 1S18 normal Tone

This is a basic schematic... Personally, I use 500K pots instead of 250K, for a brighter tone, my feeling being that if I want it less bright, that is what the tone knob is for...

Also, open up your guitar and make a note of the exact wiring you see, and you could probably just duplicate it, although I prefer knowing what's really going on...

Here is what's really going on...

The pickup has a hot and a ground leg... Simple...
A volume control is just a fixed resistance across hot and ground, with the center tap (what moves internally) variable from one side to the other...
So, with a 500K pot, with the volume all the way up, the tap is over at the pickup side, so the output is still 500K above ground...
With the volume all the way down, there is no resistance between the output and ground...

A tone control simply is a variable resistance between the hot and a capacitor that ties to ground...

With the tone all the way up on a 500K pot, there is 500K of resistance between the hot and the capacitor...
With the tone all the way down, there is no resistance between hot and the capacitor...
 
OK, this guy has all sorts of wiring mods...

http://www.geocities.jp/dgb_studio/index_e.htm

Go to the right side of the page and click Wiring For Guitar
Next, click 1S Mod(27)
now scroll down to 1S18 normal Tone

This is a basic schematic... Personally, I use 500K pots instead of 250K, for a brighter tone, my feeling being that if I want it less bright, that is what the tone knob is for...

Also, open up your guitar and make a note of the exact wiring you see, and you could probably just duplicate it, although I prefer knowing what's really going on...

Here is what's really going on...

The pickup has a hot and a ground leg... Simple...
A volume control is just a fixed resistance across hot and ground, with the center tap (what moves internally) variable from one side to the other...
So, with a 500K pot, with the volume all the way up, the tap is over at the pickup side, so the output is still 500K above ground...
With the volume all the way down, there is no resistance between the output and ground...

A tone control simply is a variable resistance between the hot and a capacitor that ties to ground...

With the tone all the way up on a 500K pot, there is 500K of resistance between the hot and the capacitor...
With the tone all the way down, there is no resistance between hot and the capacitor...

...ok, a couple things. Firstly, this guitar only has one wire...it is sheathed in a mesh sleeve kinda...I reckon thats the ground...the guitar is not soldered together. If it were, I would have just followed the wiring...

...secondly, wtf does this mean?...

zoezo2.png
 
:) That is a schematic... OK, you need a diagram... Yes, the braided sheath is the ground... Can you take a picture of the guitar so I can know the layout? Then I can make up a diagram for you...
 
What I am getting at is a picture of the front of the guitar so I know where the physical location of the holes are... Then I will draw a diagram true to the layout...

Now, regarding HELP!'s diagram... His shows push/pull pots, which you don't have in the picture...

On his diagram, the push/pull switch on the volume pot just switches a cap right to ground, giving you instant mud...

The push/pull switch on the tone knob just throws a 500K resistor from hot to ground, which is paralleling 500K across the volume pot, thus dropping the overall resistance from hot to ground to 250K ohms, thus, lightly mudding up the tone...

So, your picture of the pots shows me that they are not push/pull, and it is just a super simple circuit...
 
...one thing I've just noticed: the tone pot only has 2 prongs...the third one looks like its been cut off...I suppose it doesnt matter, since the tone pot only needs 2 prongs...
 
Last edited:
Well, you're only going to use two. In a normal setup, one lug goes back to Volume, the other is grounded to the case with the capacitor. The other is not used, unless you want to turn up instead of down. :lol: the two outside lugs will determine if you're going to play right of left handed.
Never seen anyone clip one off, but I suppose it won't hurt...unless it's one of the two lugs you need. :grin:

EG
 
Don't know if it helps, but here's the harness from my Junior. Pretty similar...single pickup, tone, volume.
This one is done "50s style."

OklahomaCity-20110625-00248.jpg


EG
 
Don't know if it helps, but here's the harness from my Junior. Pretty similar...single pickup, tone, volume.
This one is done "50s style."

OklahomaCity-20110625-00248.jpg



EG

...that looks about it, only the cap is bigger...I think I may be missing a wire somewhere, because I cant find where the two pots connect to eachother...other than the cap...
 
...that looks about it, only the cap is bigger...I think I may be missing a wire somewhere, because I cant find where the two pots connect to eachother...other than the cap...

The only other wire to the tone pot would be the ground connection from the body of the volume pot to the body of the tone pot...
 
I'm not sure if Gibson still used 50s wiring in 59 or not.

If you follow the Duncan plan, it'll work, but it will be modern wiring.
The one in my pic differs in how the tone pot connects.


EG
 
Back
Top