Project SG

Modern Saint

Starve your Fear, Feed your Dream!
A few months ago I wanted to clean up the nut on my SG. Well stupid me ended up filing too much into the groove because I wanted a clean looking nut slot - so major fail. Well there was two ways to repair this: 1) fill in the gaps with a mixture of cornstarch and super glue or 2) replace the nut - I chose #2.

So I picked a Graphtech TUSQ XL for my SG

Tusc XL.jpg


Taped the fretboard and the headstock so only the old nut was exposed. Using a new #11 X-actoe blade, I sliced into the gap to cut away the lacquer.

3 - Taped edges.jpg


After carefully cutting, I used one of my StewMac sanding blocks and a hammer gently tapping both sides to loosen the nut.

4 - Loosing the nut.jpg


The nut was removed and cleaning of the nut slot need to be done. Gentle sanding to remove debris and either glue or lacquer in the gap.

5 - Nut Removed.jpg


Test fitting the nut to see how much I will have to sand off.

6 - Test Fitting The Nut.jpg


Starting with 220 sand paper I had a lot to remove. As I got closer to my target, I used 600 grit each time verifying the height with the original nut.

7 - Sanding.jpg


8 - Height Comparison #2.jpg


Malia helped me as well. She was my supporting cast.

Malia wanting to help.jpg


The guitar was strung up and I gap tested the high and low E-Strings. Gap for the High E was .006 and Low E was .010. This was done by pressing on the 3 fret and measuring on the first fret.

10 - String Gap Tested and Time To Glue The Nut.jpg


The nut is all glued in, guitar is strung up and ready for tuning.

10 - String Gap Tested and Time To Glue The Nut.jpg


Tuning up the SG and letting it stablize. Will let dry overnight and play the guitar tomorrow for a jam and then a reheasal Monday night.


11 - All glued in, strung up and ready to play.jpg


12 - Tuning and Testing.jpg
 
I’m doing the same thing on my strat build this week. I’m waiting until I go to my folk’s house this week. My uncle lives with them and game has the tools for it.
 
I didn't realize you had an SG?

An early '70s SG was my first electric guitar. Paid $250 for it. It had the small square fret markers.
 
I didn't realize you had an SG?

An early '70s SG was my first electric guitar. Paid $250 for it. It had the small square fret markers.

Yeah a hidden secret. Bought it a few years ago for a Foghat tribute. It was tuned to Open E. When the Tom Petty tribute reunited, I started to use the SG for that band as Mike Campbell for a few years used one. No tremolo on this one though.

http://markweinguitarlessons.com/forums/threads/strange-new-guitar-day-gibson-sg.71670/#post-1195348
 
1. Kudos to you, sir, for doing a nut replacement. That level of luthierness is way beyond me.

2. Foghat tribute?!? (insert missing facepalm smiley here)
 
1. Kudos to you, sir, for doing a nut replacement. That level of luthierness is way beyond me.

2. Foghat tribute?!? (insert missing facepalm smiley here)

Yes a Foghat tribute. I was a sub that was going to take over in a gigging project. It sadly faded like many other bands. Was looking forward to playing a few shows.
 
The results of the new nut is incredible. Beautiful sustain and tone and the guitar intonate really well. Typically a string would slip and go slightly off pitch but not with the new nut Makes me think about changing more of them. I may do my Tele project first.
 
Back
Top