Corona build - now built!

Chad

Slender Hobbit
Since I got the shipping notice from Warmoth, might as well start the thread :grin:

Here is what I have so far.

IMG_6349.jpg


I had the neck, tuners, neck plate and control plate. I ordered the pots, switch and capacitor from Emerson Custom. The pickups are Mojo Tone 52 quiet coils. Since I go the shipping notification and Mastery is still sold out, I ordered a Callaham bridge last night. Body should be here Friday.
 
I am surprised! What did you not like about teles?

A couple of things. One of the biggest things, is I’m a pretty small person, so a Tele just felt huge. These are 7/8 Warmoths so the bodies are smaller. Not a huge difference but enough to make a difference to me. I also used to play with the guitar strapped lower than I do now, so that with the full size Tele made them hard for me to play. I also used to play much more aggressively, and would bash my hand on the bridge.

But I’ve always loved the way they looked and loved their sound. I’m really glad I happened to look at the Stupid Deal section on Warmoth’s site a few years ago and took the plunge on the black 7/8 body.
 
A couple of things. One of the biggest things, is I’m a pretty small person, so a Tele just felt huge. These are 7/8 Warmoths so the bodies are smaller. Not a huge difference but enough to make a difference to me. I also used to play with the guitar strapped lower than I do now, so that with the full size Tele made them hard for me to play. I also used to play much more aggressively, and would bash my hand on the bridge.

But I’ve always loved the way they looked and loved their sound. I’m really glad I happened to look at the Stupid Deal section on Warmoth’s site a few years ago and took the plunge on the black 7/8 body.

That's really cool. I'm glad it worked out well for you.

I love teles.
 
Since I got the shipping notice from Warmoth, might as well start the thread :grin:

Here is what I have so far.

View attachment 58849

I had the neck, tuners, neck plate and control plate. I ordered the pots, switch and capacitor from Emerson Custom. The pickups are Mojo Tone 52 quiet coils. Since I go the shipping notification and Mastery is still sold out, I ordered a Callaham bridge last night. Body should be here Friday.


FYI - Many years ago I put a set of Mojotone Clone 52 pickups in my MIM std, and they sound really good.

OTOH, I also installed just a couple of years ago an Emerson 4-way setup, and I've never been able to get that motherfucker to work right. It only gives me two different tones (albeit, they are really excellent, zero-hum tones), so I feel sort of let-down.
 
FYI - Many years ago I put a set of Mojotone Clone 52 pickups in my MIM std, and they sound really good.

OTOH, I also installed just a couple of years ago an Emerson 4-way setup, and I've never been able to get that motherfucker to work right. It only gives me two different tones (albeit, they are really excellent, zero-hum tones), so I feel sort of let-down.

I just ordered the parts from Emerson, I wired it up myself. I've never tried his pre=wired stuff.
 
Picked up the body this morning and put it together. Ran into an issue with neck pickup. The Mojo Tone quiet coil's base plate was too big for the route. Decided against making the hole bigger and am going to order an Area T for the neck. I know those fit.

I really like how it turned out. I'm gonna give the bridge and bridge pickup a try and see if they stick around.

IMG_6356.jpg

The pic doesn't quite capture the color. It's really close to a aged heritage cherry, I'm really glad I listened to my family. I was gonna go white, but they all voted for this color.
 
Back
Top