Barber Dirty Bomb for sale...

I have one. I'm surprised that you don't like it. @Mark, I'll bring it to P-Stock for you to try. It's killer through my Sovtek and a 4 12 cab...huge Recto palm mutes without sounding like a Recto :thu:
 
Depends...is this the kind of pedal you are looking for? High gain distortion shenanigans on tap.

the pedal does more than high gain i think... Aahazz has a clip of playing one with pretty low/medium gain. sounds pretty good
 
And, of course, this is 1/5th of the way to just getting a Line 6 POD HD500 and just being done with it for a while... Le sigh... :)
 
I've got a Barber Direct Drive Super Sport on my board, and it sounds great through all of my amps. Especially the Bassman and the Weber.
 
find a used one?

Heck, even if I buy new, it wouldn't take long to spend a lot more on individual pedals than the HD500... Of course, after I get the HD500, my obsessive compulsive nature will kick in, and I'll still want pedals... :facepalm:

Sorry for the thread hijack!
 
Heck, even if I buy new, it wouldn't take long to spend a lot more on individual pedals than the HD500... Of course, after I get the HD500, my obsessive compulsive nature will kick in, and I'll still want pedals... :facepalm:

Sorry for the thread hijack!

Not to queer John's thread but you're in the perfect position for a multi-efx unit or even a computer interface/software package like Guitar Rig. You don't know what you want, don't already have a collection of pedals where you need to fill in the blank spots and modeling will give you the opportunity to sample a bit of everything.
 
Heck, even if I buy new, it wouldn't take long to spend a lot more on individual pedals than the HD500... Of course, after I get the HD500, my obsessive compulsive nature will kick in, and I'll still want pedals... :facepalm:

Sorry for the thread hijack!

i started out with a Digitech RP-10 in 1994. i had only been playing a few years, had no idea what i wanted, so i decided to get everything at once.

the board in my last pic, including cables and the board itself, cost me $1000.
 
Back
Top